Please wait while the page loads...

What Does the Check Engine Light Mean?

One of the most customarily misunderstood lights or indicators in your 2013 BMW Z4 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few diversified ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2013 BMW Z4. Some of these include shifting automatic transmissions ignition timing, controlling engine speed, and implementing stability control, just to name many. With that being said, the check engine light can suggest a variety of disparate things. It can be as visible as your gas cap being loose or as strict as engine knocking. If your check engine light is on in your 2013 BMW Z4, contact Plaza BMW. Our BMW service department can help you opt for what code is turning your check engine light on or diagnose why your check engine light is shining. Contact Plaza BMW today!

2013 BMW Z4 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard swiftly illuminates, but in reality, it is not something that should cause you to shut down in fear legitimate away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also prevalent as the OBD (on-board computer diagnostic system) in your Z4. There are hundreds of distinct codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling difficult diagnostics will give you helpful knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, obvious and helpful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of adequate OBD codes, there are also hundreds of adequate reasons for the light, including:

  • O2 Sensor
  • Old Battery
  • Computer output circuit issues
  • Loose Gas Cap or Missing Gas Cap
  • Fuel and air metering systems problems
  • Transmission issues
  • Bad Spark Plugs
  • Ignition system faults
  • Emissions controls issues

This is why it is exciting for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Plaza BMW at 3145823628 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out quickly by a certified BMW mechanic. If the engine light comes on due to a precarious concern, you risk bad your car supplemental by not repairing the issue honest away.

Will the check engine light reset itself?

The check engine light on your 2013 BMW Z4 will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going good, and you did assorted of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 BMW Z4 light will go off after about 20-40 miles. If you travel to work over that deposit and the light is still on, you will need to bring it in to Plaza BMW so the light and code can be double-checked and reset.

2013 BMW Z4 Check Engine Light Flashing

Although there are many feasible causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several routine causes encompassing something as comfortable as a loose gas cap. Different routine reasons for a Check Engine Light are dirty mass airflow sensor, faulty head gasket, a malfunction with the fuel injection system, damaged oxygen sensor, faulty emissions control part, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the BMW Certified Technicians and the certified service protocol to isolate the root problem and repair it as necessary to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your BMW issue was fixed.

Every 2013 BMW Z4 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its hard systems. The sensors are continually detecting conditions while sending data to the mechanical control unit. If the mechanical control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is amiss nor what to do about it. That’s where we come in; Plaza BMW provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Hugely Qualified Service experienced.

How many miles can you drive with the check engine light?

It could be anything from a bad sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy appropriately. If you check engine light is glaring, we advocate that you pull over and contact Plaza BMW to help choose if your vehicle is safe to drive in or if we advocate a tow truck. Since each check engine code has its own level of severity, it is troublesome to predict how bountiful miles you can drive with the warning light on.

Check Engine Light Service 2013 BMW Z4

What do you do when you’re driving along in your BMW Z4 and suddenly, a yellow light flashes on your dash and says "Check Engine". If you’re like most BMW owners, your heart sinks a miniature because you have miniature idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t find out you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 BMW Z4 checked as soon as possible. Ignoring that warning could end up causing major damage to pricey engine components.

When your 2013 BMW Z4's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t gargantuan, a computer turns on your check engine light. This amber or yellow light is continuously labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an computerized analyze tool that is used by our BMW auto repair mechanics at Plaza BMW. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to mean the issue and repair it.

2013 BMW Z4 Check Engine Light

A flashing light suggests that the problem is strict and if not taken care of immediately may result in major damage to the vehicle. If the check engine light in your 2013 BMW Z4 starts flashing, that means that the problem needs immediate attention and your BMW should be delivered in immediately. This blinking light typically indicates a rigorous engine misfire allowing unburned fuel to be discarded into the exhaust system. There it can expeditiously raise the temperature of the catalytic converter to a point where wear and tear is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can exactly be the cause. A harmful, former or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive experts at Plaza BMW quickly by calling 3145823628. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a tremendously expensive repair.

Is it safe to drive your 2013 BMW Z4 with the check engine light on?

This question is not very easy because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be protected to commute. This is commonly indicated by a logical glow of the check engine light. If you notice a difference in the performance of the automobile, it could be an indication of a more applicable problem. If the check engine light is twinkling, this means that there is a applicable issue and it is recommended to service your BMW Z4 now. Call the experts at Plaza BMW by dialing 3145823628 so you can describe the issues. Or decrease your speed and bring your 2013 BMW to our certified mechanics as soon as possible.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is normally between $88 and $111. The useful news, Plaza BMW offers complimentary multi-point inspections and free diagnostics, in most cases, to aid represent the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more unhealthy failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it useful to get the fair code reading and diagnosis.

What could cause the check engine light to come on in a 2013 BMW Z4?

When your check engine light comes on, this could be as easy as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a relentless problem that could cause relentless break to your engine and come with a dominant repair bill. Depending on your make and model, the check engine light will illuminate or blink. A persistent glow frequently means something less relentless but a shining check engine light expresses that your vehicle’s engine is in relentless trouble and service is essential abruptly. If your check engine light is shining in your 2013 BMW Z4, we extraordinarily recommend not to drive the vehicle and schedule BMW service today. Below is a list of the most typical reasons your check engine light can come on:

  • New Spark Plugs or Plug Wires are essential for your 2013 BMW Z4. The spark plugs are the part of your engine that ignites the air/fuel variety in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or traditional, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, first-rate to more expensive repairs.
  • The battery is poor or dead. The battery in your 2013 BMW Z4 is every important. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did some decades ago, and they don't really require maintenance. The estimate of a new one depends on the type of BMW you drive, but check our current service coupons and specials.
  • Your 2013 BMW Z4 has a vacuum leak. Every BMW Z4 has a vacuum system that performs a wide variety of functions. The vacuum system also helps rebate harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can parched out and crack, especially if they’re exposed to extraordinary heat or extreme chilly.
  • One of the most active and frequent cause is that your 2013 BMW Z4 gas cap is loose, damaged or missing. The gas cap for your 2013 BMW Z4 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is traditional or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on immediately after you put gas in your 2013 BMW Z4, first thing you should check is to make courageous the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2013 BMW Z4’s exhaust system. The catalytic converter's work is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Plaza BMW offers a complimentary multi-point inspection with every BMW service. If you have an issue with your catalytic converter and don't get it repaired, your 2013 BMW Z4 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause further problems from overheating.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or further item can wreak havoc on your 2013 BMW Z4 if it’s not installed appropriately. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even avert the vehicle from starting. If these issues sound contemporary, bring your Z4 to BMW and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost some bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your mass airflow sensor (known as MAF) needs to be replenished. The mass airflow sensor in your BMW Z4 is what determines how much fuel is essential to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to genuine changes, like altitude. If your BMW Z4 is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • Your O2 Sensor (Oxygen Sensor) needs to be replenished. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less practical when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 BMW Z4's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to mean the good variety of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.