Please wait while the page loads...

What could cause the check engine light to come on in a 2016 BMW X6?

When your check engine light comes on, this could be as effortless as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a perilous problem that could cause perilous damage to your engine and come with a unusual repair bill. Depending on your make and model, the check engine light will illuminate or blink. A consistent glow consistently means something less perilous but a shining check engine light expresses that your vehicle’s engine is in perilous trouble and service is needed suddenly. If your check engine light is shining in your 2016 BMW X6, we hugely advise not to travel to work the vehicle and schedule BMW service today. Below is a list of the most daily reasons your check engine light can come on:

  • Issues with any aftermarket items. An aftermarket alarm, exhaust or added item can wreak havoc on your 2016 BMW X6 if it’s not installed properly. These aftermarket parts and accessories can dump the battery, trigger the check engine light, or even avoid the vehicle from starting. If these issues sound prevailing, bring your X6 to BMW and have our team of certified mechanics ensure that your aftermarket items were installed accurately and aren't causing any issue. Getting accessories, particularly aftermarket parts and accessories, or using OEM parts original place might price a little bit more but could save you money from having to get meager work and damage caused by meager installation work corrected.
  • The battery is low or dead. The battery in your 2016 BMW X6 is every numerous. Without a vehicle battery, your vehicle won’t start, light up the road ahead, play the radio or charge your phone. Today’s vehicle batteries last much longer than they did assorted decades ago, and they don't actually require maintenance. The rate of a new one depends on the type of BMW you drive, but check our prevailing service coupons and specials.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your BMW X6 is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to bold changes, like altitude. If your BMW X6 is having trouble starting, idling rough or has a abrupt change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • New Spark Plugs or Plug Wires are needed for your 2016 BMW X6. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience meager performance and reduced power. In assorted extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, major to more expensive repairs.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2016 BMW X6’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is generally caused by neglected maintenance, which is why Plaza BMW offers a complimentary multi-point inspection with every BMW service. If you have an issue with your catalytic converter and don't get it repaired, your 2016 BMW X6 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your vehicle may run at a higher temperature, too, which can cause added problems from overheating.
  • One of the most normal and countless cause is that your 2016 BMW X6 gas cap is loose, damaged or missing. The gas cap for your 2016 BMW X6 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on quickly after you put gas in your 2016 BMW X6, original thing you should check is to make hopeful the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less adequate when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2016 BMW X6's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the modest mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a vehicle to fail an emissions test.
  • Your 2016 BMW X6 has a vacuum leak. Every BMW X6 has a vacuum system that performs a enormous variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, particularly if they’re exposed to awesome heat or extreme bitter.

Check Engine Light Service 2016 BMW X6

What do you do when you’re driving along in your BMW X6 and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most BMW owners, your heart sinks a small because you have small idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2016 BMW X6 checked as soon as conceivable. Ignoring that warning could end up causing substantial damage to expensive engine components.

When your 2016 BMW X6's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t definite, a computer turns on your check engine light. This amber or yellow light is typically labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic diagnose tool that is used by our BMW auto repair mechanics at Plaza BMW. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you asset that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to determine the issue and repair it.

How much does it cost to get the engine light checked?

The average price for a check engine light diagnosis & testing is customarily between $88 and $111. The judicious news, Plaza BMW offers complimentary multi-point inspections and free diagnostics, in most cases, to help asset the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not accurately tightened to a more unsafe failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it judicious to get the nice code reading and diagnosis.

Is it safe to drive your 2016 BMW X6 with the check engine light on?

This question is not very easy because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be dependable to drive. This is commonly indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more scrupulous problem. If the check engine light is flashing, this means that there is a scrupulous issue and it is recommended to service your BMW X6 abruptly. Call the specialists at Plaza BMW by dialing 3145823628 so you can describe the issues. Or reduce your speed and bring your 2016 BMW to our certified technicians as soon as potential.

What Does the Check Engine Light Mean?

One of the most generally misunderstood lights or indicators in your 2016 BMW X6 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a little distinctive ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a assortment of things for your 2016 BMW X6. Some of these include shifting automatic transmissions controlling engine speed, ignition timing, and implementing stability control, just to name a little. With that being said, the check engine light can mean a collection of definite things. It can be as pure as your gas cap being loose or as strict as engine knocking. If your check engine light is on in your 2016 BMW X6, contact Plaza BMW. Contact Plaza BMW today! Our BMW service department can help you find out what code is turning your check engine light on or observe why your check engine light is flashing.

Will the check engine light reset itself?

The check engine light on your 2016 BMW X6 will frequently shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did numerous of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2016 BMW X6 light will go off after about 20-40 miles. If you drive over that sum and the light is still on, you will need to bring it in to Plaza BMW so the light and code can be double-checked and reset.

2016 BMW X6 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that small light on your vehicle’s dashboard quickly flashes, but in reality, it is not something that should cause you to shut down in fear good away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also admitted as the OBD (on-board computer diagnostic system) in your X6. There are hundreds of chance codes that your check engine light can indicate. While that sounds daunting, with a small patience, tackling essential diagnostics will give you advantageous knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Sadly, distinct and advantageous vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of feasible OBD codes, there are also hundreds of feasible reasons for the light, including:

  • Ignition system faults
  • O2 Sensor
  • Emissions controls issues
  • Fuel and air metering systems problems
  • Transmission issues
  • Computer output circuit issues
  • Loose Gas Cap or Missing Gas Cap
  • Bad Spark Plugs
  • Old Battery

This is why it is contentious for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Plaza BMW at 3145823628 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out abruptly by a certified BMW mechanic. If the engine light comes on due to a applicable concern, you risk bad your car further by not repairing the issue correct away.

2016 BMW X6 Check Engine Light

A flashing light indicates that the problem is unstable and if not taken care of promptly may result in preeminent damage to the vehicle. If the check engine light in your 2016 BMW X6 starts flashing, that means that the problem needs quick attention and your BMW should be brought in promptly. This blinking light usually indicates a severe engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can promptly raise the temperature of the catalytic converter to a point where damage is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can absolutely be the cause. A detrimental, historic or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair. If your check engine light is flashing, please contact our team of automotive experts at Plaza BMW quickly by calling 3145823628.

2016 BMW X6 Check Engine Light Flashing

Although there are countless ability causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are plentiful commonplace causes including something as commonplace as a loose gas cap. Alternative commonplace reasons for a Check Engine Light are dirty mass airflow sensor, faulty emissions control part, damaged oxygen sensor, a malfunction with the fuel injection system, faulty head gasket, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the BMW Certified Technicians and the certified service protocol to isolate the root problem and repair it as necessary to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your BMW issue was repaired.

Every 2016 BMW X6 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the car on its laborious systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what absolutely is unsound nor what to do about it. That’s where we come in; Plaza BMW provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Tremendously Qualified Service experienced.

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy accordingly. Since each check engine code has its own level of severity, it is difficult to predict how bountiful miles you can drive with the warning light on. If you check engine light is flashing, we recommend that you pull over and contact Plaza BMW to assist elect for if your vehicle is safe to drive in or if we recommend a tow truck. It could be anything from a bad sensor to plug wires needing to be replaced.