Please wait while the page loads...

Check Engine Light Service 2017 BMW 428i

What do you do when you’re driving along in your BMW 428i and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most BMW owners, your heart sinks a slight because you have slight idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the rate of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the vehicle over to the side of the road and call a tow truck, but it is recommended that you get your 2017 BMW 428i checked as soon as functional. Ignoring that warning could end up causing major damage to expensive engine components.

When your 2017 BMW 428i's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t acceptable, a computer turns on your check engine light. This amber or yellow light is constantly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic observe tool that is used by our BMW auto repair mechanics at Plaza BMW. There are also a number of rather cheap code readers that are designed for do-it-yourselfers, should you elect for that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an licensed professional to elect for the issue and repair it.

2017 BMW 428i Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that scant light on your vehicle’s dashboard suddenly lights up, but in reality, it is not something that should cause you to shut down in fear proper away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also favored as the OBD (on-board computer diagnostic system) in your 428i. There are hundreds of divergent codes that your check engine light can mean. While that sounds daunting, with a scant patience, tackling extensive diagnostics will give you proper knowledge about your vehicle and will also allow that Check Engine Light to do what it is actually supposed to do: be your guide. Unfortunately, distinct and authentic vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of attainable OBD codes, there are also hundreds of attainable reasons for the light, including:

  • Emissions controls issues
  • Fuel and air metering systems problems
  • Loose Gas Cap or Missing Gas Cap
  • Bad Spark Plugs
  • Old Battery
  • Computer output circuit issues
  • Ignition system faults
  • O2 Sensor
  • Transmission issues

This is why it is big for someone who does not have a few of automotive knowledge to not assume what a code means. If the engine light comes on due to a dangerous concern, you risk damaging your car further by not repairing the issue right away. When your check engine light comes on, you should get it checked out quickly by a certified BMW technician. Call Plaza BMW at 3145823628 today or schedule your check engine light service online today!

What Does the Check Engine Light Mean?

One of the most frequently misunderstood lights or indicators in your 2017 BMW 428i is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few various ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2017 BMW 428i. Some of these include controlling engine speed, ignition timing, shifting automatic transmissions and implementing stability control, just to name some. With that being said, the check engine light can represent a variety of different things. It can be as evident as your gas cap being loose or as awesome as engine knocking. If your check engine light is on in your 2017 BMW 428i, contact Plaza BMW. Our BMW service department can help you read what code is turning your check engine light on or diagnose why your check engine light is flashing. Contact Plaza BMW today!

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more direct failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it detectable to get the noble code reading and diagnosis. The middle estimate for a check engine light diagnosis & testing is commonly between $88 and $111. The detectable news, Plaza BMW offers complimentary multi-point inspections and free diagnostics, in most cases, to help opt for the cause of your check engine light.

Is it safe to drive your 2017 BMW 428i with the check engine light on?

This question is not particularly easy because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be strong to drive. This is typically indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more curious problem. If the check engine light is twinkling, this means that there is a curious issue and it is recommended to service your BMW 428i straightaway. Call the experts at Plaza BMW by dialing 3145823628 so you can describe the issues. Or decrease your speed and bring your 2017 BMW to our certified mechanics as soon as likely.

2017 BMW 428i Check Engine Light

A flashing light expresses that the problem is perilous and if not taken care of hastily may result in major break to the vehicle. If the check engine light in your 2017 BMW 428i starts flashing, that means that the problem needs immediate attention and your BMW should be brought in hastily. This blinking light usually indicates a relentless engine misfire allowing unburned fuel to be ditched into the exhaust system. There it can hastily raise the temperature of the catalytic converter to a point where break is feasible, requiring an fancy repair. Some owners ask if spark plugs cause the check engine light to flash? This can truly be the cause. A bad, historic or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair. If your check engine light is flashing, please contact our team of automotive veterans at Plaza BMW rapidly by calling 3145823628.

What could cause the check engine light to come on in a 2017 BMW 428i?

When your check engine light comes on, this could be as commonplace as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a risky problem that could cause risky damage to your engine and come with a large repair bill. Depending on your make and model, the check engine light will illuminate or blink. A dependable glow generally means something less risky but a blinking check engine light indicates that your vehicle’s engine is in risky trouble and service is crucial instantly. If your check engine light is blinking in your 2017 BMW 428i, we particularly recommend not to drive the vehicle and schedule BMW service today. Below is a list of the most regular reasons your check engine light can come on:

  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2017 BMW 428i’s exhaust system. The catalytic converter's work is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Plaza BMW offers a complimentary multi-point inspection with every BMW service. If you have an issue with your catalytic converter and don't get it fixed, your 2017 BMW 428i will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause substitute problems from overheating.
  • Issues with each aftermarket items. An aftermarket alarm, exhaust or substitute item can wreak havoc on your 2017 BMW 428i if it’s not installed accordingly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound easy, bring your 428i to BMW and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing each issue. Getting accessories, remarkably aftermarket parts and accessories, or using OEM parts earliest place might cost a small bit more but could save you money from having to get meager work and damage caused by meager installation work corrected.
  • The battery is low or dead. The battery in your 2017 BMW 428i is every imposing. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did some decades ago, and they don't certainly require maintenance. The price of a new one depends on the type of BMW you drive, but check our adequate service coupons and specials.
  • Your 2017 BMW 428i has a vacuum leak. Every BMW 428i has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can barren out and crack, remarkably if they’re exposed to exciting heat or extreme bleak.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, admitted as the O2 sensor, measures the sum of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less productive when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2017 BMW 428i's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the decent variety of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your BMW 428i is what determines how much fuel is essential to run your engine efficiently by measuring the sum of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to important changes, like altitude. If your BMW 428i is having trouble starting, idling rough or has a immediate change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • New Spark Plugs or Plug Wires are essential for your 2017 BMW 428i. The spark plugs are the part of your engine that ignites the air/fuel variety in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or historic, you will experience meager performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, primary to more expensive repairs.
  • One of the most common and bountiful cause is that your 2017 BMW 428i gas cap is loose, damaged or missing. The gas cap for your 2017 BMW 428i serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is historic or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on hastily after you put gas in your 2017 BMW 428i, earliest thing you should check is to make satisfied the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.

Will the check engine light reset itself?

The check engine light on your 2017 BMW 428i will usually shut itself off if the issue or code that caused it to turn on is serviced. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going favorable, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2017 BMW 428i light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to deliver it in to Plaza BMW so the light and code can be double-checked and reset.

2017 BMW 428i Check Engine Light Flashing

Although there are countless potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are bountiful legal causes including something as specific as a loose gas cap. Additional legal reasons for a Check Engine Light are dirty mass airflow sensor, a malfunction with the fuel injection system, damaged oxygen sensor, faulty head gasket, faulty emissions control part, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the BMW Certified Technicians and the certified service protocol to isolate the root problem and repair it as necessary to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your BMW issue was repaired.

Every 2017 BMW 428i was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its harsh systems. The sensors are normally detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light lights up telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is incorrect nor what to do about it. That’s where we come in; Plaza BMW provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Tremendously Qualified Service experienced.

How many miles can you drive with the check engine light?

It could be anything from a bad sensor to plug wires needing to be replenished. If you check engine light is flashing, we endorse that you pull over and contact Plaza BMW to help favor if your vehicle is safe to drive in or if we endorse a tow truck. Since each check engine code has its own level of severity, it is difficult to predict how countless miles you can drive with the warning light on. The safest bet is to decipher the code and then plan your strategy accordingly.